Tamiya 58289 - Tamiya 1/10 Ferrari Modena TL01 Chassis

This is a 1/10 scale Electric Powered, Radio Controlled, Four Wheel Drive (4WD)
Tamiya Ferrari Modena TL01 On-Road Kit.
For Beginner to Intermediate Modelers.

FEATURES: TL01 Tub Chassis
Shaft Driven Four Wheel Drive
3-Step Forward and 3-Step Reverse Mechanical Speed Control
Front and Rear Double Wishbone Suspension
Coil Spring Dampened Suspension System (Not Oil Type Shocks)
Polycarbonate Monocoque Type Frame
Unique Integrated Chassis Combination Gearbox Frame
540 Type Electric Motor
Racing Slick Tires
Plastic Bushings (Not Bearings)
Highly Detailed Polycarbonate Ferrari Modena Body Shell

INCLUDES: Stock 540 Type Motor.
Mechanical Speed Control
Racing Slick Tires
Coil Over (Not Oil-Filled) Friction Shocks
Two Sticker Sheets
One Window Mask Sheet
Instruction Booklet

SPECS: Motor Type: 540 size with Bullet Type Connectors
Body: Ferrari Coupe
Speed Control: 3-Step Forward, 3-Step Reverse, Mechanical
Shocks: Coil Spring Dampened (Not Oil Filled)
Tires: O.D.: 65mm 2.2" (all rims and tires are the same dimension)
I.D.: 46mm (1.9")
Width: 26mm (1.0")
CHASSIS, BODY,
Length: 452mm (17.8") Length: 406mm (16.0")
Width: 187mm (7.4") Width at front & rear wheels: 187mm (7.3")
Height: 125mm (4.9") Heigth: 109mm (4.3")
Wheels: Silver Spoked
Adapter Type: 12mm Standard Hexagonal (same as Kyosho)

REQUIRES: Radio: 2-Channel with 2-Standard Servos
Battery: 6 cell with Tamiya Connector
Charger for 6 cell battery
Polycarbonate Paint
Phillips Head Screw Drivers
Needle Nose Pliers
Hobby Knife
Lexan Scissors
CA Glue

COMMENTS: The kit is pictured in Red on the box.
The body has a protective coating on the outside that may be removed
by lifting one corner.
There is no steering bellcrank used in this kit.
The steering tie-rods and front and rear camber are not adjustable.
The kit is designed to only use a 48 pitch Metric pinion gear
that is 19, 21 or 23 tooth.
For Complete Set Of Bearings,
Bearing Locations:
(2) 5 x 11mm Bearings (Included) For Counter Gear
(18) 5 x 11mm Bearings (Optional) For Drive Train
(4) 5 x 11mm Bearings (Optional) For Wheels

?

?